Step 6 Enter the default username (cisco) and password (cisco) at the login prompt.
login: cisco
Password: cisco
You are required to change your password immediately (password aged)
Changing password for cisco.
(current) password: cisco
Step 7 Enter your new password twice.
New password: new password
Retype new password: new password
***NOTICE***
This product contains cryptographic features and is subject to United States and local country laws
governing import, export, transfer and use. Delivery of Cisco cryptographic products does not
imply third-party authority to import, export, distribute or use encryption. Importers, exporters,
distributors and users are responsible for compliance with U.S. and local country laws. By using
this product you agree to comply with applicable laws and regulations. If you are unable to comply
with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to [email protected].
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
CIMA CIMAPRA19-F03-1 Test Pass4sure Thirdly, we guarantee that No Pass Full Refund, CIMA CIMAPRA19-F03-1 Test Pass4sure If you do not pass the exam at your first try with ExamDown materials, we will give you a full refund, So get your CIMA CIMAPRA19-F03-1 Unlimited Exam Practice cert faster without resorting to CIMA CIMAPRA19-F03-1 Unlimited Exam Practice braindumps, knowing that an CIMA CIMAPRA19-F03-1 Unlimited Exam Practice dumps can only lead to trouble and a possible failed test, Secondly, our staff work 24 hours a day online to answer your questions about CIMAPRA19-F03-1 exam resources so that all your puzzles will be dissipated in a moment.
If your personality and style do not mesh Test CIMAPRA19-F03-1 Pass4sure well with your potential employer, it is better to find that out in the interview, not two months down the road, Instead, CIMAPRA19-F03-1 Exam Vce Format you can select through page items to get hold of objects that are behind them.
Control Panel Applets, A message that may be valid CIMAPRA19-F03-1 Pass4sure Pass Guide for one receiver may be invalid for another receiver, Along with a thorough introduction to routingsyntax and semantics,you'll find techniques for testing https://passguide.dumpexams.com/CIMAPRA19-F03-1-vce-torrent.html and troubleshooting routes, and tipson the use of this important part of your Rails skill set.
So you can trust our study guide, One of the perks https://actualtests.real4prep.com/CIMAPRA19-F03-1-exam.html of having small quarters to shoot in is that light can bounce around, accenting the subject, Whether you're an accomplished musician or a Exam CIMAPRA19-F03-1 Reference student, GarageBand is the most rewarding way to create, perform, and record your own music.
This is my full revenge, Because of their Test CIMAPRA19-F03-1 Pass4sure business focus, micro hotel will provide better properties and service, The Methods of the Send Mail Task, To select and CWDP-304 Reliable Test Bootcamp modify the contents of a picture or text box, you need to use the Content tool.
Which of the following protocols is used for monitoring the Test CIMAPRA19-F03-1 Pass4sure health of network equipment, computer equipment, and devices, The Windows Kernel, Starting with an Actual Problem.
However, you don't want the screen to move, so hold it firmly Test CIMAPRA19-F03-1 Study Guide in place as you press the water out with your free hand, Thirdly, we guarantee that No Pass Full Refund.
If you do not pass the exam at your first try Valid CIMAPRA19-F03-1 Test Answers with ExamDown materials, we will give you a full refund, So get your CIMA cert faster without resorting to CIMA braindumps, SC-900 Unlimited Exam Practice knowing that an CIMA dumps can only lead to trouble and a possible failed test.
Secondly, our staff work 24 hours a day online to answer your questions about CIMAPRA19-F03-1 exam resources so that all your puzzles will be dissipated in a moment, As for high passing rate and high quality of CIMAPRA19-F03-1 actual test questions, you can get pass the CIMAPRA19-F03-1 actual test and get the certification with ease.
Our CIMAPRA19-F03-1 pass-sure materials: F3 Financial Strategy can give you the right answer to help you work out those problems that most of you are trapped into, Our CIMAPRA19-F03-1 test dumps materials & CIMAPRA19-F03-1 learning materials will be best for them since they are busy on working and lack of time on examinations.
You must work hard to upgrade your IT skills, Quality of CIMAPRA19-F03-1 practice materials you purchased is of prior importance for consumers, Also, the money you have paid for our CIMAPRA19-F03-1 study guide will not be wasted.
As long as you use it on the Windows system, then you can enjoy the convenience of this version brings, So choose us, choose a brighter future, There is no inextricably problem within our CIMAPRA19-F03-1 practice materials.
the study guides of Sapsam are there to help you get through the exam without any hassle, Here are some advantages of our CIMAPRA19-F03-1 exam prep, our study materials guarantee the high-efficient preparing time for you to make progress is mainly attributed to our Test CIMAPRA19-F03-1 Pass4sure marvelous organization of the content and layout which can make our customers well-focused and targeted during the learning process.
Our CIMAPRA19-F03-1 exam reference provides the instances, simulation and diagrams to the clients so as to they can understand them intuitively.
NEW QUESTION: 1
Drag and Drop (Build List and Reorder)
You are the desktop architect for an enterprise organization with computers that run Windows 7 Enterprise.
You need to create a customized WinPE image.
Which four actions should you perform in sequence? (To answer, move the appropriate actions from the list
of actions to the answer area and arrange them in the correct order.)
Build List and Reorder:
Answer:
Explanation:
Explanation:
Walkthrough: Create a Custom Windows PE Image
NEW QUESTION: 2
DRAG DROP
Match the Password recovery techniques or command on left with the platform that they are used on right
Answer:
Explanation:
Explanation:
To recover the password on appliances, follow these steps:
Step 1 Reboot the appliance.
The following menu appears:
GNU GRUB version 0.94 (632K lower / 523264K upper memory)
0: Cisco IPS
1: Cisco IPS Recovery
2: Cisco IPS Clear Password (cisco)
Use the
Over 63789+ Satisfied Customers
Valid and updated X'.
Step 6 Enter the default username (cisco) and password (cisco) at the login prompt.
login: cisco
Password: cisco
You are required to change your password immediately (password aged)
Changing password for cisco.
(current) password: cisco
Step 7 Enter your new password twice.
New password: new password
Retype new password: new password
***NOTICE***
This product contains cryptographic features and is subject to United States and local country laws
governing import, export, transfer and use. Delivery of Cisco cryptographic products does not
imply third-party authority to import, export, distribute or use encryption. Importers, exporters,
distributors and users are responsible for compliance with U.S. and local country laws. By using
this product you agree to comply with applicable laws and regulations. If you are unable to comply
with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to [email protected].
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
Your exam dumps are easy-understanding. I just used your study guide for my X'.
Step 6 Enter the default username (cisco) and password (cisco) at the login prompt.
login: cisco
Password: cisco
You are required to change your password immediately (password aged)
Changing password for cisco.
(current) password: cisco
Step 7 Enter your new password twice.
New password: new password
Retype new password: new password
***NOTICE***
This product contains cryptographic features and is subject to United States and local country laws
governing import, export, transfer and use. Delivery of Cisco cryptographic products does not
imply third-party authority to import, export, distribute or use encryption. Importers, exporters,
distributors and users are responsible for compliance with U.S. and local country laws. By using
this product you agree to comply with applicable laws and regulations. If you are unable to comply
with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to [email protected].
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
Your questions are great. I passed with X'.
Step 6 Enter the default username (cisco) and password (cisco) at the login prompt.
login: cisco
Password: cisco
You are required to change your password immediately (password aged)
Changing password for cisco.
(current) password: cisco
Step 7 Enter your new password twice.
New password: new password
Retype new password: new password
***NOTICE***
This product contains cryptographic features and is subject to United States and local country laws
governing import, export, transfer and use. Delivery of Cisco cryptographic products does not
imply third-party authority to import, export, distribute or use encryption. Importers, exporters,
distributors and users are responsible for compliance with U.S. and local country laws. By using
this product you agree to comply with applicable laws and regulations. If you are unable to comply
with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to [email protected].
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
X'.
Step 6 Enter the default username (cisco) and password (cisco) at the login prompt.
login: cisco
Password: cisco
You are required to change your password immediately (password aged)
Changing password for cisco.
(current) password: cisco
Step 7 Enter your new password twice.
New password: new password
Retype new password: new password
***NOTICE***
This product contains cryptographic features and is subject to United States and local country laws
governing import, export, transfer and use. Delivery of Cisco cryptographic products does not
imply third-party authority to import, export, distribute or use encryption. Importers, exporters,
distributors and users are responsible for compliance with U.S. and local country laws. By using
this product you agree to comply with applicable laws and regulations. If you are unable to comply
with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to [email protected].
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
The questions from the X'.
Step 6 Enter the default username (cisco) and password (cisco) at the login prompt.
login: cisco
Password: cisco
You are required to change your password immediately (password aged)
Changing password for cisco.
(current) password: cisco
Step 7 Enter your new password twice.
New password: new password
Retype new password: new password
***NOTICE***
This product contains cryptographic features and is subject to United States and local country laws
governing import, export, transfer and use. Delivery of Cisco cryptographic products does not
imply third-party authority to import, export, distribute or use encryption. Importers, exporters,
distributors and users are responsible for compliance with U.S. and local country laws. By using
this product you agree to comply with applicable laws and regulations. If you are unable to comply
with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to [email protected].
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
Good score for passing the X'.
Step 6 Enter the default username (cisco) and password (cisco) at the login prompt.
login: cisco
Password: cisco
You are required to change your password immediately (password aged)
Changing password for cisco.
(current) password: cisco
Step 7 Enter your new password twice.
New password: new password
Retype new password: new password
***NOTICE***
This product contains cryptographic features and is subject to United States and local country laws
governing import, export, transfer and use. Delivery of Cisco cryptographic products does not
imply third-party authority to import, export, distribute or use encryption. Importers, exporters,
distributors and users are responsible for compliance with U.S. and local country laws. By using
this product you agree to comply with applicable laws and regulations. If you are unable to comply
with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to [email protected].
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
NEW QUESTION: 3
A. VMware vCluster
B. VMware vLockstep
C. VMware vmSafe
D. VMware vShield
Answer: B
NEW QUESTION: 4
Why would the architect choose active-active bonding when configuring network interfaces for guest VM networks?
A. It uses a round robin load-balancing policy, which provides better distribution of traffic across the interfaces in the bond.
B. It uses a hashing algorithm, which provides better distribution of traffic across the interfaces in the bond.
C. It provides load balancing of VM traffic across multiple physical NIC interfaces at a per guest basis, and offers improved distribution of traffic across physical interfaces in the bond.
D. It sends all guest VM traffic in the bond to an active interface, which provides the best distribution of network load.
Answer: B
Sapsam Practice Exams are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development - no all study materials.
We are committed to the process of vendor and third party approvals. We believe professionals and executives alike deserve the confidence of quality coverage these authorizations provide.
If you prepare for the exams using our Sapsam testing engine, It is easy to succeed for all certifications in the first attempt. You don't have to deal with all dumps or any free torrent / rapidshare all stuff.
Sapsam offers free demo of each product. You can check out the interface, question quality and usability of our practice exams before you decide to buy.